Which brands use LocoNet?

Uhlenbrock (Intellibox), Fleischmann (older), Digitrax and compatible devices.

Control your Uhlenbrock / Digitrax (LocoNet) with ModelRailPro

LocoNet is the layout bus used by Uhlenbrock (Intellibox) and Digitrax. ModelRailPro connects to it through a LocoNet adapter (e.g. PR3/LocoBuffer) over serial.

Brand: Uhlenbrock / Digitrax Protocol: LocoNet

Connection settings

Serieel ~57600 baud · LocoNet (PR3/USB)

How to connect your Uhlenbrock (LocoNet)

Connect your Uhlenbrock (LocoNet) to your computer via a USB-serial adapter.
Start the Node.js version of ModelRailPro (serial ports).
Go to Manage → Connection, pick "Uhlenbrock (LocoNet)" and select the serial port.
Save. Pick a loco and drive.

⬇️ Download ModelRailPro 🔑 Try free for 30 days

Good to know

A LocoNet-to-USB adapter (PR3, LocoBuffer-USB or similar) plus the Node.js version is required.
LocoNet also carries feedback (e.g. Uhlenbrock LISSY), which can feed the block detection.

Official site ↗

Frequently asked questions

Which brands use LocoNet?: Uhlenbrock (Intellibox), Fleischmann (older), Digitrax and compatible devices.

Other command stations

Control your Uhlenbrock / Digitrax (LocoNet) with ModelRailPro

Connection settings

How to connect your Uhlenbrock (LocoNet)

Good to know

Frequently asked questions

Other command stations

DCC-EX

Z21

DR5000

Märklin CS2/CS3

ECoS

Twin Center

Lenz (XpressNet)