ModelRailPro logo ModelRailProNLENDE

Control your ESU ECoS with ModelRailPro

The ESU ECoS / ECoS 2 is a high-end multi-protocol command station (DCC, Motorola, mfx/M4, Selectrix) with a colour touchscreen. ModelRailPro connects over TCP using ESU’s "ECoSnet" text protocol.

Brand: ESU Protocol: ECoSnet (TCP) Ready — verify on layout

Connection settings

TCP 15471 · default IP 192.168.0.5

How to connect your ECoS

  1. Connect your ECoS to the same network/router as your computer.
  2. Start ModelRailPro — your browser opens automatically.
  3. Go to Manage → Connection, pick "ECoS" and enter the IP address.
  4. Save. Pick a loco and drive — also from your phone on the same Wi-Fi.
⬇️ Download ModelRailPro 🔑 Try free for 30 days

Good to know

Official site ↗

Frequently asked questions

Does the ECoS need extra software?
No, the ECoSnet interface is built in. ModelRailPro connects directly over your network.
Is the ECoS connection final?
It is implemented and ready; we are confirming it on a physical ECoS layout.

Other command stations

DCC-EX

DCC-EX (open source)
DCC-EX / DCCWorks

Z21

Roco / Fleischmann
Z21 LAN (UDP)Works

DR5000

Digikeijs
Z21-compatibel (LAN) + LocoNetWorks

Märklin CS2/CS3

Märklin / Trix
Märklin CAN (UDP)Ready — verify on layout

Twin Center

Fleischmann / Uhlenbrock
P50X (serieel)Ready — verify on layout

Lenz (XpressNet)

Lenz
XpressNetIn progress

Uhlenbrock (LocoNet)

Uhlenbrock / Digitrax
LocoNetIn progress