ModelRailPro logo ModelRailProNLENDE

Control your Uhlenbrock / Digitrax (LocoNet) with ModelRailPro

LocoNet is the layout bus used by Uhlenbrock (Intellibox) and Digitrax. ModelRailPro connects to it through a LocoNet adapter (e.g. PR3/LocoBuffer) over serial. (Connection in progress.)

Brand: Uhlenbrock / Digitrax Protocol: LocoNet In progress

Connection settings

Serieel ~57600 baud · LocoNet (PR3/USB)

How to connect your Uhlenbrock (LocoNet)

  1. Connect your Uhlenbrock (LocoNet) to your computer via a USB-serial adapter.
  2. Start the Node.js version of ModelRailPro (serial ports).
  3. Go to Manage → Connection, pick "Uhlenbrock (LocoNet)" and select the serial port.
  4. Save. Pick a loco and drive.
⬇️ Download ModelRailPro 🔑 Try free for 30 days

Good to know

Official site ↗

Frequently asked questions

Is LocoNet supported yet?
The LocoNet connection is in progress. The slot-based handling is implemented; hardware verification follows.
Which brands use LocoNet?
Uhlenbrock (Intellibox), Fleischmann (older), Digitrax and compatible devices.

Other command stations

DCC-EX

DCC-EX (open source)
DCC-EX / DCCWorks

Z21

Roco / Fleischmann
Z21 LAN (UDP)Works

DR5000

Digikeijs
Z21-compatibel (LAN) + LocoNetWorks

Märklin CS2/CS3

Märklin / Trix
Märklin CAN (UDP)Ready — verify on layout

ECoS

ESU
ECoSnet (TCP)Ready — verify on layout

Twin Center

Fleischmann / Uhlenbrock
P50X (serieel)Ready — verify on layout

Lenz (XpressNet)

Lenz
XpressNetIn progress