How does ModelRailPro talk to a DR5000?

Through its Z21-compatible LAN mode (UDP 21105) — pick "Z21" as the command station.

Does the DR5000 support feedback?

Yes, via LocoNet/s88 (e.g. DR4088); occupancy then shows in the block view.

Control your Digikeijs DR5000 with ModelRailPro

The Digikeijs DR5000 is a versatile multi-protocol command station (DCC, MM, Selectrix) with built-in Wi-Fi. It can emulate the Z21 LAN protocol, and that is exactly how ModelRailPro connects — instantly, over your network.

Brand: Digikeijs Protocol: Z21-compatibel (LAN) + LocoNet Works

Connection settings

UDP 21105 (Z21-modus) · IP instellen in DR-Command

How to connect your DR5000

Connect your DR5000 to the same network/router as your computer.
Start ModelRailPro — your browser opens automatically.
Go to Manage → Connection, pick "DR5000" and enter the IP address.
Save. Pick a loco and drive — also from your phone on the same Wi-Fi.

⬇️ Download ModelRailPro 🔑 Try free for 30 days

Good to know

Enable the Z21 emulation in the DR5000 settings (DR-Command) before connecting.
Note the IP you gave the DR5000 and enter it in ModelRailPro.

Official site ↗

Frequently asked questions

How does ModelRailPro talk to a DR5000?: Through its Z21-compatible LAN mode (UDP 21105) — pick "Z21" as the command station.
Does the DR5000 support feedback?: Yes, via LocoNet/s88 (e.g. DR4088); occupancy then shows in the block view.

Other command stations

Control your Digikeijs DR5000 with ModelRailPro

Connection settings

How to connect your DR5000

Good to know

Frequently asked questions

Other command stations

DCC-EX

Z21

Märklin CS2/CS3

ECoS

Twin Center

Lenz (XpressNet)

Uhlenbrock (LocoNet)